| |
Automotive Sensor Simulator & Tester ADD71
Measure the signals of automotive sensors
1. Allow simulation of most sensorand computer management components
2. Check basic ECU operation
3. Eliminate unnecessary replacement of non-defective sensors
Overview
Features:
Measure the signals of automotive sensors
1. The most complete hand held diagnostic tester for sensors, wiring, connectors and on-board computers
DC voltage, lambda, frequency and pulse signals can be measured
2. Digital display shows actual output of signals
3. Measures any voltage AC or DC, resistance or frequency output
Allows Simulation of most Sensor and computer management components
4. Simulating temperature sensors, throttle potentiometers, switches, air
flow meters and lambda /oxygen sensors
5. Features AC voltage output to simulate vehicle speed sensors(vss),
CAM, CRANK, and ignition reluctors
6. Simulates actual working condition of any sensor without having to remove it
from the vehicle A.B.S., Crank, Can, Coolant, Oxygen, MAP, MAF, MAT, VSS, etc
Cheeks basic ECU operation
7. Controlling the signals being produced allows you to check ECU response and
operation. This prevents mis-diagnosis where the fault may lie in the ECU itself
or in the wiring between the component and the ECU. Works independently or with
any scan tool ever made
8. Can be used on any domestic or import vehicle
9. Eliminates unnecessary replacement of non-defective sensors
10. Can drive computer into"open or closed loop."
|
SPECIFCATIONS
|
|
Simulate Signal
|
Range
|
Function
|
|
DC Voltage
|
0-1V
|
Simulating lambda/oxygen sensors
|
|
0-5V
|
Simulating DC signal of sensors
|
|
0-12V
|
|
Resistance
|
0-5K
|
Simulating temperature or resistance sensors
|
|
0-200K
|
|
Frequency SignalV/Duty/Hz
|
0-5v 10-90% 10-4KHz
|
Simulating frequency signal sensors
|
|
0-12V 10-90% 10-4KHz
|
|
|
|
Test Function
|
Range
|
Basic Accuracy
|
|
DC Voltage
|
400mV,4v ,40v,400v,1000v
|
±(0.5%+3d)
|
|
AC Voltage
|
400mV,4v ,40v,400v,750v
|
±(0.8%+3d)
|
|
DC Current
|
40mA,400mA,10A
|
±(1.2%+3d)
|
|
AC Current
|
40mA,400mA,10A
|
±(1.5%+3d)
|
|
Resistance(Ω)
|
400,4K,40K,400K,4M,40M
|
±(1.0%+3d)
|
|
Capacitance
|
40nF,400nF,4μF,40μF,100μF
|
±(5.0%+3d)
|
|
Frequency
|
10Hz-10MHz
|
±(0.5%+3d)
|
|
Duty cycle
|
0.1%-99.9%
|
±(2.0%+3d)
|
|
Diode test and Audible Continuity test
|
|
Test current:1±0.6mA
|
|
|
>60Ω Buzzer sounds
|
|
